got it working was missing the fact I had to comment out the unused axis’s in
core_sim.hal # create HAL signals for position commands from motion module # loop position commands back to motion module feedback ##net Xpos axis.8.motor-pos-cmd => axis.8.motor-pos-fb ddt_x.in thanks guys, On 14-12-09 09:15 AM, Kirk Wallace wrote: > On 12/08/2014 04:04 PM, andy pugh wrote: >> On 8 December 2014 at 23:27, linden <[email protected]> wrote: >>> Yes just the flash screen no error >> That's rather unusual. >> >> dmesg might give some clue, but I wouldn't bet on it. >> >> Try starting LinuxCNC from the terminal (just open a terminal and type >> "linuxcnc", you might get a bit more output. >> > You might try looking at DEBUG in the EMC section of the documents here: > http://linuxcnc.org/docs/html/config/ini_config.html#sub:EMC-section > > I found this at the mentioned link: > ~~~~~~~~~~~~ > // factored out from emcglb.h so subsystems not requiring the > // emcglb.h defines may include them as well > > > > #define EMC_DEBUG_CONFIG 0x00000002 > #define EMC_DEBUG_VERSIONS 0x00000008 > #define EMC_DEBUG_TASK_ISSUE 0x00000010 > #define EMC_DEBUG_NML 0x00000040 > #define EMC_DEBUG_MOTION_TIME 0x00000080 > #define EMC_DEBUG_INTERP 0x00000100 > #define EMC_DEBUG_RCS 0x00000200 > #define EMC_DEBUG_INTERP_LIST 0x00000800 > #define EMC_DEBUG_IOCONTROL 0x00001000 > #define EMC_DEBUG_OWORD 0x00002000 > #define EMC_DEBUG_REMAP 0x00004000 > #define EMC_DEBUG_PYTHON 0x00008000 > #define EMC_DEBUG_NAMEDPARAM 0x00010000 > #define EMC_DEBUG_GDBONSIGNAL 0x00020000 > #define EMC_DEBUG_PYTHON_TASK 0x00040000 > > // not interpreted by EMC. > #define EMC_DEBUG_USER1 0x10000000 > #define EMC_DEBUG_USER2 0x20000000 > > #define EMC_DEBUG_UNCONDITIONAL 0x40000000 // always logged > #define EMC_DEBUG_ALL 0x7FFFFFFF /* it's an int for %i > to work > */ > // debug prefix flags > #define LOG_TIME 1 > #define LOG_PROCESSID 2 > #define LOG_FILENAME 4 // and line > > > ------------------------------------------------------------------------------ Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from Actuate! Instantly Supercharge Your Business Reports and Dashboards with Interactivity, Sharing, Native Excel Exports, App Integration & more Get technology previously reserved for billion-dollar corporations, FREE http://pubads.g.doubleclick.net/gampad/clk?id=164703151&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
