Nicklas I am busy with my mill for my workshop but I do have some test machines on the desktop that helps a bit with basic testing. I configure machines for other people so I always have some sort of system to test with :) even if it just for a short time.
I will put a test system together and keep you updated on how it goes. On 2015-01-06 23:04, Karlsson & Wang wrote: > Yes I have it working but far from complete. PWM outputs, encoder and GPIO > seems to work but I did not have enough time to test it on real machine yet. > Do you have a private address there I could send the files ?? > > I make circuits boards and solder myself which take some time. I also have > practical problem, the garage with the machine is located on the country side > and I have to take care of a child which do not always like to follow me to > garage testing the machine. > > Nicklas Karlsson > > > > > On Tue, 06 Jan 2015 19:09:05 +0200 > Marius Liebenberg <mar...@mastercut.co.za> wrote: > >> Do you have the STM32 working with Hostmot yet? I would like to have a >> look at the code if I might. >> >> On 2015-01-06 18:53, Nicklas Karlsson wrote: >>> I am currently working with a STM32F4 discovery board and use the Hostmot >>> mesa 2 driver to communicate with it via ethernet. It only 3 volt logical >>> levels and analog, PWM, Encoder, Simple IO, analog and other buses if >>> needed. >>> >>> I have been looking on the arduino boards to connect simple IO, at first >>> 24 volt for axis breaks and end switches but there are also signals. >>> >>> The Hostmot mesa 2 use UDP, what does the arduino board use? >>> >>> Regards Nicklas Karlsson >>> >>> >>> >>>> I have been working on a network solution for some extra IO. I used an >>>> Arduino with an Ethernet shield and created a user space component that >>>> seem to work fine. >>>> Some testing is required and I would appreciate any participation :) >>>> >>>> udpio and Arduino >>>> <http://www.linuxcnc.org/index.php/english/forum/24-hal-components/28745-io-interface-with-arduino-over-ethernet> >>>> >>>> >>>> -- >>>> >>>> Regards /Groete >>>> >>>> Marius D. Liebenberg >>>> +27 82 698 3251 >>>> +27 12 743 6064 >>>> QQ 1767394877 >>>> >>>> ------------------------------------------------------------------------------ >>>> Dive into the World of Parallel Programming! The Go Parallel Website, >>>> sponsored by Intel and developed in partnership with Slashdot Media, is >>>> your >>>> hub for all things parallel software development, from weekly thought >>>> leadership blogs to news, videos, case studies, tutorials and more. Take a >>>> look and join the conversation now. http://goparallel.sourceforge.net >>>> _______________________________________________ >>>> Emc-users mailing list >>>> Emc-users@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/emc-users >>>> >>> >>> ------------------------------------------------------------------------------ >>> Dive into the World of Parallel Programming! The Go Parallel Website, >>> sponsored by Intel and developed in partnership with Slashdot Media, is your >>> hub for all things parallel software development, from weekly thought >>> leadership blogs to news, videos, case studies, tutorials and more. Take a >>> look and join the conversation now. http://goparallel.sourceforge.net >>> _______________________________________________ >>> Emc-users mailing list >>> Emc-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> -- >> >> Regards /Groete >> >> Marius D. Liebenberg >> +27 82 698 3251 >> +27 12 743 6064 >> QQ 1767394877 >> >> >> ------------------------------------------------------------------------------ >> Dive into the World of Parallel Programming! The Go Parallel Website, >> sponsored by Intel and developed in partnership with Slashdot Media, is your >> hub for all things parallel software development, from weekly thought >> leadership blogs to news, videos, case studies, tutorials and more. Take a >> look and join the conversation now. http://goparallel.sourceforge.net >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ > Dive into the World of Parallel Programming! The Go Parallel Website, > sponsored by Intel and developed in partnership with Slashdot Media, is your > hub for all things parallel software development, from weekly thought > leadership blogs to news, videos, case studies, tutorials and more. Take a > look and join the conversation now. http://goparallel.sourceforge.net > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 QQ 1767394877 ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
