2015-02-03 17:51 GMT+02:00 Marius Alksnys <[email protected]>: > Viesturs, > > I had the same issue as you do with Plasma and THCAD. I contacted local > Plasma source service guy, who advised me to take a signal from the > source before high frequency generator. Another suggestion was to take > cheapest multimeter, connect it to this point, while set at HV DC. If it > survives - the voltages are not too high :)
I ended up soldering a small divider board, very close to what Marius Liebenberg shared. I will test it on thursday. Viesturs ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
