Does anyone know anything about one of these drives? http://www.easys.it/prod_file/azionamento_dc_ind.pdf I don't know Italian, and I have not been able to get any email response from the drive's manufacturer.
I have one that was used to run a servo saw stop/pusher system. It's control died and I would love to be able to revive it using Linuxcnc. The stop manufacturer wasn't much more help but at least they would talk to me. They sent me a pdf for the machines schematics but were unable to provide any information on how to control the drive. I started a thread on the forum where I was able to post a copy of the schematics the stop's manufacturer sent me. http://linuxcnc.org/index.php/english/forum/27-driver-boards/28847-help-with-servo-drive#55722 What would I need to know in order to use the RS-485 to control this, and any ideas where or how to glean it? -- ======================================== Todd Zuercher mailto:[email protected] ======================================== ------------------------------------------------------------------------------ Dive into the World of Parallel Programming. The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
