yeah i figured, i got it working and are stressing it now, i wrote this for my own head - but will most likely google index pretty fast as well..
http://www.roughedge.se/blogg/2015/02/27/installing-linuxcnc-2-7-uspace-on-debian-wheezy/ Servothread 11347, Base thread 12665 while running 5 glxgears, gzip -c /dev/urandom /dev/null, stress -c 16 -l 16 -m 16 -t1 4400 So i think im in the clear now. =) Uspace build could handle alot more punishment. =) // Andreas Sebastian Kuzminsky skrev den 2015-02-27 19:49: > On 2/27/15 11:44 AM, Andreas Pettersson wrote: >> So im guessing the step, where you do ./configure -a in the debian >> folder is void and null when running the RT_PREEMPT kernel, because it >> states there is no realtime kernel and refuses to configure. >> In effect i cant figure out which packages i need to install other than >> running the other configure and see what it crashes on.. (a step that >> ive got stuck on at several times). > The docs on building LinuxCNC are a bit scattered and probably > incomplete & out of date, but try this page: > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Uspace > > ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
