I have 2 Hurco mills - 1 I plan to retrofit to LinuxCNC the other I hope to get running on the OEM control.
What I would like to do is take the control I tear out for the retrofit and fix its issues and get it running on the bench with an emulator. Basically I would need a box to accept 3 axis +/- 10V inputs for velocity and output quadrature to make the control think its actually spinning the servos. Might need an Arduino sub circuit just to emulate a homing switch for each axis, or just a momentary button switchs. (can't remember if it does a double seek.) The complete wiring will get complex with all the other relays and safety interlocks that the control will require me to lie to it... I know once upon a time there was a board to accept +/-10V that output step/dir signals but I think that is also long gone. Any ideas? Greg ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
