Greg I would just put in the Mesa 5i25 with a 7i77 for the servo's. All you need has been catered for there already with plentu of IO for limits and relays. And if your Hurco's have a tool changer on I am almost finished with a tool changer component and control panel for use with Axis on LCNC.
------ Original Message ------ From: "Greg Bentzinger" <[email protected]> To: "[email protected]" <[email protected]> Sent: 2015-05-17 01:52:25 Subject: [Emc-users] How to build a little black box - Machine emulator. >I have 2 Hurco mills - 1 I plan to retrofit to LinuxCNC the other I >hope to get running on the OEM control. > >What I would like to do is take the control I tear out for the retrofit >and fix its issues and get it running on the bench with an emulator. > >Basically I would need a box to accept 3 axis +/- 10V inputs for >velocity and output quadrature to make the control think its actually >spinning the servos. Might need an Arduino sub circuit just to emulate >a homing switch for each axis, or just a momentary button switchs. >(can't remember if it does a double seek.) > >The complete wiring will get complex with all the other relays and >safety interlocks that the control will require me to lie to it... > >I know once upon a time there was a board to accept +/-10V that output >step/dir signals but I think that is also long gone. > >Any ideas? > >Greg > >------------------------------------------------------------------------------ >One dashboard for servers and applications across >Physical-Virtual-Cloud >Widest out-of-the-box monitoring support with 50+ applications >Performance metrics, stats and reports that give you Actionable >Insights >Deep dive visibility with transaction tracing using APM Insight. >http://ad.doubleclick.net/ddm/clk/290420510;117567292;y >_______________________________________________ >Emc-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
