Greetings; Building on an idea Andy suggested earlier today.
Somewhat entending a thread on tapers I started a couple years ago, now I would like to be advised on the taper angle to use, where the tapered ring being wedged in to the hub is steel and the hub is moderately hard alu. I've done quite a bit of googling, and read the older threads here, but the closest I've come is an included angle in the 14 degree area, or 7 degrees off axis in cnc terms. No one has discussed the effect of dissimilar metals that I have noted in skimming about 65 old messages or in the google outputs. My copy of #27 is out in the shop, and the weather is wet and noisy and I'm still pretty well crippled up. I could get there, but it would likely cost me another painful, sleepless night. Is it in there (#27), or are there some general rules of thumb that govern this to a "first pass that will work well enough" accuracy? Thanks everybody. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
