On Tuesday 16 June 2015 16:34:37 Todd Zuercher wrote: > You can buy just the individual hubs from MSC.
The only one that resembles these is their # 35407022, but it says the max bore is .500", and I need a 14mm bore while still being a 2 legged hub. I'll go measure these for OD & see if they have a part #. Nope, well polished alu, 30mm OD, 35mm assembled length,.3748" bore & I need an 8mm bore. Going up in bore size but holding to the same family so hubs would interchange, the up stops at 1/2". No 14mm in that frame size. McMasterCarr has similar items, but something north of 50 bucks for all 3 pieces. Thumbs down. On both hands. MSC sells at 1/4 that. I'll go search fleabay after din-din. > ----- Original Message ----- > From: "Gene Heskett" <ghesk...@wdtv.com> > To: emc-users@lists.sourceforge.net > Sent: Tuesday, June 16, 2015 4:01:31 PM > Subject: [Emc-users] Lovejoy size miss-match > > Greetings all; > > The screw kit came in today, looks to be decent, but came with Lovejoy > style couplers, 2 for a 3/8" shaft motor and one for a 1/2" shaft > motor. > > Unforch, the 470 oz/in XY motors have an 8mm shaft, where the 1600 > oz/in Z motor has a 14mm shaft. This kit as bought from a separate > vendor. > > Anybody wanna trade half lovejoy parts, I have 3 in inch, 2 @ .375" > and 1 @ .500", need 2 @ 8mm and 1 @ 14mm. All in 4 legged cross > pattern as the center element. > > It did not come with any instructions, and I have gone back thru the > packing 3 times. This is the $699 kit from a David Clements in the > cactus patch, and while his phone number is listed, its not in > service. The Y axis in particular looks to be a puzzle as the nut > doesn't appear to have a mounting tab as used by the grizzly part. > > Thanks guys. > > Cheers, Gene Heskett Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
