On Tue, 30 Jun 2015, Drew Rogge wrote: > Date: Tue, 30 Jun 2015 18:38:43 -0700 > From: Drew Rogge <d...@dasrogges.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] flashing with mesaflash? > > The bit file is what gets written to the board. Don't forget to power cycle > your computer after installing. Not reboot, not restart, power cycle. The > power cycle is necessary to write the code to the FPGA. > > Drew
If you started with the 5I25 loaded with a fairly recent bitfile, you can also use mesaflash's --reload option to load the new bitfile into the FPGA instead of a power cycle > > On 6/30/15 6:32 PM, Gene Heskett wrote: >> I have installed these file from 5i25.zip, into /lib/firmware/hm2/5i25: >> gene@GO704:/lib/firmware/hm2$ ls -l 5i25 >> total 348 >> -rw-r--r-- 1 root root 340704 Sep 5 2014 5i25_prob_rfx2.bit >> -rw-r--r-- 1 root root 9504 Jan 17 2014 5i25_prob_rfx2.xml >> >> But which is it that I am supposed to write to the 5i25, using mesaflash? >> ISTR its the .xml file but its been a year or so since the last time I >> did it. >> >> Some install docs in that 5i25.zip sure would be handy. >> >> Is there another site that does explain this? >> >> Cheers, Gene Heskett > > > ------------------------------------------------------------------------------ > Don't Limit Your Business. Reach for the Cloud. > GigeNET's Cloud Solutions provide you with the tools and support that > you need to offload your IT needs and focus on growing your business. > Configured For All Businesses. Start Your Cloud Today. > https://www.gigenetcloud.com/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Don't Limit Your Business. Reach for the Cloud. GigeNET's Cloud Solutions provide you with the tools and support that you need to offload your IT needs and focus on growing your business. Configured For All Businesses. Start Your Cloud Today. https://www.gigenetcloud.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
