On 1 September 2015 at 20:12, Gene Heskett <[email protected]> wrote: > But while it did slow down the turn around of the spindle, I am getting a > huge overspeed in the new direction until it settles back to the > commanded rpms.
This sounds like you have a PID controlled spindle and the PID is fighting the Limit3 You need the Limit3 _before_ the PID, not after. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
