> -----Original Message----- > From: Jason Burton [mailto:lathebuil...@gmail.com] > Sent: September-17-15 10:08 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] CAD/CAM for LinuxCNC > > > Fusion 360 CAM is very nice. >
I went to the web site and tried to download from Debian. "Your operating system is not supported. Fusion 360 is supported on 64-bit Windows 7 or newer and 64-bit Mac OS X 10.9 or newer." >From the web site: "Fusion 360T is the first 3D CAD/CAM tool of its kind, connecting your entire product development process in a single cloud-based tool." Cloud based implies permanently connected to the internet right? That's a non-starter for the same reason MACH4 is a non-starter. I realize I may sound rather odd when I say this but think about it. Walk up to your 1942 South Bend lathe and you can turn out metal parts. Surf just about any forum on the internet more than 1 year old and click on links that end up with a 404 not found error. Support cloud computing and buy into the deal that next year it will cost you again or it won't be available at all. John ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
