On Mon, 12 Oct 2015, Karlsson & Wang wrote: > Date: Mon, 12 Oct 2015 00:04:31 +0200 > From: Karlsson & Wang <nicklas.karls...@karlssonwang.se> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: emc-users@lists.sourceforge.net > Subject: [Emc-users] Hostmot2 (Use two cards) > > I am trying to use two ethernet cards at the same time with the hostmot2 > driver but get an error message "waitpid failed". I suspect this is because > I try to load the low level driver twice, do anybody have an idea if this > might be the case? > > Regards Nicklas Karlsson
You load the driver only once with multiple sets of config info in the driver command line (IP addresses etc) I've had 4 cards running simultaneously for about a month at 2 KHz without issue > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users