Hello all,
At a loss cant figer out what is going on here I am trying to load the
tripod sim in tklinux drop down list with no luck. See error below i get
the same error with all 3 configurations in the tklinux drop down list.
All the Axis sim choices work and some of the other ones as well. Is
there any other options or recommendations for experimenting with no
trivial kins in a simulated environment.
Where would I find Non trivial kins examples I would like to start
playing and work toward building and simulating the kins for my
unconventional machine
thanks again
linden
draft@X200CA-draft ~/Linuxcnc_Sim/linuxcnc/scripts $ ./linuxcnc
LINUXCNC - 2.8.0~pre1
Machine configuration directory is
'/home/draft/Linuxcnc_Sim/linuxcnc/configs/sim/tklinuxcnc'
Machine configuration file is 'tripod.ini'
Starting LinuxCNC...
Found file(lib): /home/draft/Linuxcnc_Sim/linuxcnc/lib/hallib/tripodsim.hal
Note: Using POSIX non-realtime
Error in startup script: can't find package Linuxcnc
while executing
"package require Linuxcnc"
(file "/home/draft/Linuxcnc_Sim/linuxcnc/tcl/tklinuxcnc.tcl" line 21)
Shutting down and cleaning up LinuxCNC...
task: 257 cycles, min=0.000016, max=0.008605, avg=0.001036, 0 latency
excursions (> 10x expected cycle time of 0.001000s)
Note: Using POSIX non-realtime
LinuxCNC terminated with an error. You can find more information in the
log:
/home/draft/linuxcnc_debug.txt
and
/home/draft/linuxcnc_print.txt
as well as in the output of the shell command 'dmesg' and in the terminal
draft@X200CA-draft ~/Linuxcnc_Sim/linuxcnc/scripts $
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
