Gene got a link to one? JT
On 12/26/2015 4:32 PM, Gene Heskett wrote: > On Friday 25 December 2015 23:28:01 Jack Coats wrote: > >> I am looking on the best way to connect my NEMA 17 steppers to the >> Stepper drivers. >> >> I am contemplating either direct wiring (just solder, tape, heat >> shrink tube) each wire back to the screw terminals on the stepper >> driver. >> >> Second option is using connectors, DIN (screw attach cover) or Molex >> push connectors near the stepper, and near the controller box where >> the stepper drivers reside. >> >> Suggestions? >> > Where I have a well contained driver box setup, I am in favor of the 4 > pin, screw on connector used as a mic connector on the older J.A.Pan > made CB radios. Male panel mount, matching female cable pairs can be > had for under a $2 bill from some sites, with some even throwing in > China Post for free. Decent connector for the sheckles, and won't come > unplugged unless you unscrew the lock ring on the female. > >> Thanks in advance. ... Jack in TN >> >> ---------------------------------------------------------------------- >> -------- _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users > > Cheers, Gene Heskett ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
