the error is in the recorded data that is, the data AFTER it was transferred the transferred data might be fine and the error message is based on the stored data
the message might imply it is based on the data transferred but it aint, it is on a copy and that copy is in memory, not in a stream my 2c tomp On 02/03/2016 03:07 AM, Marius Alksnys wrote: > How would you explain that when parallel port transfers data 8 bytes at > a time and I get errors only in one bit through 3 bytes at least? > > 02/02/2016 08:49 PM, Peter C. Wallace rašė: > >> Sounds like errors in the EPP connection. I would try shortening the >> EPP cable to the minimum length (If you are using a flat cable) or >> if you need a longer cable, use a IEEE-1284 compatible cable >> and a very short flat cable adapter to the 7I43s header. Might also be a >> marginal EPP port on the Motherboard. >> >> >> Peter Wallace >> Mesa Electronics > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
