Hi Tom, very bazaar videos... almost like its toggling between imperial and metric mode (x extent jumping between 1.x and 3.x)
I ran the code on 2.5.4 simulator mode and other than having to remove the M120 and M121 codes it seems to run properly (other that z positioning as noted in header). Is it possible there is something hinky in your custom M codes? cheers Lawrence VE7IT On 16-02-25 02:55 PM, tom-...@bgp.nu wrote: > N0000 (Filename: MW-BottleOpen-v6.ngc) > N0010 (Post processor: MakerWorksPlasmaCutter.scpost) > N0020 (***WARNING*** Post processor used) > N0030 (assumes THC for Z movement) > N0040 (CODE CONTAINS NO Z MOVEMENTS) > N0050 (Date: 12/19/2012) > N0060 G20 (Units: Inches) > N0070 G90 G40 G64 P0.005 > N0080 F1 > N0090 S500 > N0100 M120 > N0110 (Part: MW-BottleOpen-v5) > N0120 (Process: Outside Offset, Inside, T1: MakerWorksPlasmaCutter) > N0130 G00 X1.7962 Y0.6557 > N0140 M03 > N0150 G04 P0.4 > N0160 G02 X1.7131 Y0.6915 I-0.0236 J0.0595 f85.0 > N0170 G01 X1.6371 Y0.8827 f85.0 > N0180 X1.6789 Y0.8908 > N0190 X1.7402 Y0.7304 > N0200 G03 X1.8175 Y0.7440 I0.0374 J0.0143 > N0210 G01 X1.8205 Y0.9183 > N0220 X1.8806 Y0.9300 > N0230 X1.9470 Y0.7685 > N0240 G03 X2.0239 Y0.7845 I0.0370 J0.0152 > N0250 G01 X2.0207 Y0.9570 > N0260 X2.0619 Y0.9651 > N0270 X2.0624 Y0.5375 > N0280 X2.0113 Y0.5275 > N0290 X1.9282 Y0.7237 > N0300 G03 X1.8513 Y0.7087 I-0.0368 J-0.0156 > N0310 G01 X1.8477 Y0.4958 > N0320 X1.7950 Y0.4855 > N0330 X1.7131 Y0.6915 > N0340 M05 > N0350 G00 X0.7799 Y0.6912 > N0360 M03 > N0370 G04 P0.4 > N0380 G02 X0.7106 Y0.6329 I-0.0638 J0.0055 > N0390 G03 X0.5616 Y0.6403 I-0.1780 J-2.0710 > N0400 X0.2693 Y0.6220 I-0.0146 J-2.1141 > N0410 G01 X0.2685 Y0.6219 > N0420 X0.1678 Y0.6066 > N0430 G02 X0.1795 Y0.6503 I0.2472 J-0.0428 > N0440 X0.2267 Y0.7216 I0.1910 J-0.0751 > N0450 G01 X0.2408 Y0.7348 > N0460 G02 X0.5562 Y0.8570 I0.3652 J-0.4745 > N0470 G03 X0.5585 Y0.8573 I-0.0033 J0.0399 > N0480 G01 X0.7034 Y0.8778 > N0490 X0.7816 Y0.8874 > N0500 X0.8492 Y0.8946 > N0510 X0.9015 Y0.8991 > N0520 Y0.6075 > N0530 G03 X0.7106 Y0.6329 I-0.3689 J-2.0456 > N0540 M05 > N0550 G00 X2.5213 Y0.6125 > N0560 M03 > N0570 G04 P0.4 > N0580 G02 X2.4545 Y0.5514 I-0.0639 J0.0028 > N0590 G03 X2.2948 Y0.5554 I-0.1875 J-4.2415 > N0600 G01 X2.2948 Y0.9045 > N0610 X2.3076 Y0.9036 > N0620 X2.3609 Y0.8981 > N0630 X2.5724 Y0.8725 > N0640 X2.6389 Y0.8631 > N0650 X2.6956 Y0.8540 > N0660 X2.7452 Y0.8448 > N0670 X2.7463 Y0.8446 > N0680 G02 X2.9341 Y0.7860 I-0.1051 J-0.6668 > N0690 X3.0578 Y0.6898 I-0.4015 J-0.6444 > N0700 X3.1609 Y0.5424 I-0.3007 J-0.3200 > N0710 G01 X3.1646 Y0.5320 > N0720 X3.1688 Y0.5167 > N0730 G02 X3.1751 Y0.4692 I-0.1656 J-0.0463 > N0740 G01 X3.1632 Y0.4695 > N0750 X3.1365 Y0.4718 > N0760 X3.0995 Y0.4762 > N0770 X3.0522 Y0.4832 > N0780 X2.9981 Y0.4921 > N0790 G03 X2.4545 Y0.5514 I-0.7310 J-4.1823 > N0800 M05 > N0810 G00 X1.3863 Y0.7472 > N0820 M03 > N0830 G04 P0.4 > N0840 G02 X1.4696 Y0.7119 I0.0240 J-0.0593 > N0850 G01 X1.5476 Y0.5189 > N0860 X1.5064 Y0.5110 > N0870 X1.4447 Y0.6721 > N0880 G03 X1.3674 Y0.6580 I-0.0374 J-0.0143 > N0890 G01 X1.3665 Y0.4838 > N0900 X1.3061 Y0.4720 > N0910 X1.2383 Y0.6322 > N0920 G03 X1.1615 Y0.6159 I-0.0368 J-0.0156 > N0930 G01 X1.1646 Y0.4445 > N0940 X1.1224 Y0.4363 > N0950 X1.1203 Y0.8636 > N0960 X1.1732 Y0.8738 > N0970 X1.2563 Y0.6773 > N0980 G03 X1.3331 Y0.6922 I0.0368 J0.0156 > N0990 G01 X1.3367 Y0.9058 > N1000 X1.3874 Y0.9156 > N1010 X1.4696 Y0.7119 > N1020 M05 > N1030 G00 X0.5238 Y0.2526 > N1040 M03 > N1050 G04 P0.4 > N1060 G02 X0.6090 Y0.2219 I0.0273 J-0.0579 > N1070 G01 X0.6408 Y0.1544 > N1080 X0.6597 Y0.1143 > N1090 X0.6911 Y0.0366 > N1100 G03 X0.6923 Y0.0338 I0.0371 J0.0150 > N1110 G01 X0.7011 Y0.0161 > N1120 G03 X0.7033 Y0.0123 I0.0358 J0.0178 > N1130 G01 X0.7119 Y-0.0012 > N1140 G03 X0.7169 Y-0.0074 I0.0337 J0.0216 > N1150 G01 X0.7188 Y-0.0094 > N1160 G03 X0.7386 Y-0.0206 I0.0287 J0.0279 > N1170 G01 X0.7511 Y-0.0234 > N1180 G03 X0.7563 Y-0.0243 I0.0089 J0.0390 > N1190 G01 X0.8105 Y-0.0293 > N1200 X0.8120 Y-0.0294 > N1210 G03 X1.2224 Y-0.0387 I0.3454 J6.1906 > N1220 G01 X1.2953 Y-0.0375 > N1230 X1.2961 > N1240 X1.3530 Y-0.0354 > N1250 X1.3540 > N1260 X1.3960 Y-0.0328 > N1270 X1.3975 Y-0.0327 > N1280 X1.4266 Y-0.0298 > N1290 G03 X1.4288 Y-0.0295 I-0.0039 J0.0398 > N1300 G01 X1.4477 Y-0.0266 > N1310 G03 X1.4512 Y-0.0259 I-0.0061 J0.0395 > N1320 G01 X1.4624 Y-0.0231 > N1330 G03 X1.4684 Y-0.0211 I-0.0096 J0.0388 > N1340 G01 X1.4743 Y-0.0186 > N1350 G03 X1.4826 Y-0.0139 I-0.0156 J0.0368 > N1360 G01 X1.5138 Y0.0093 > N1370 G03 X1.5164 Y0.0114 I-0.0238 J0.0321 > N1380 G01 X1.5351 Y0.0278 > N1390 G03 X1.5379 Y0.0306 I-0.0264 J0.0300 > N1400 G01 X1.6476 Y0.1483 > N1410 G02 X1.7886 Y0.2584 I0.4049 J-0.3733 > N1420 G01 X1.8125 Y0.2705 > N1430 G02 X2.2395 Y0.3502 I0.3942 J-0.9280 > N1440 G01 X2.2413 Y0.3502 > N1450 G02 X2.8890 Y0.3022 I0.0482 J-3.7421 > N1460 G01 X3.0740 Y0.2728 > N1470 G03 X3.2137 Y0.2661 I0.0976 J0.5703 > N1480 X3.3451 Y0.3425 I-0.0112 J0.1705 > N1490 G01 X3.3455 Y0.3431 > N1500 G03 X3.3768 Y0.4273 I-0.1827 J0.1159 > N1510 X3.3763 Y0.5277 I-0.3110 J0.0485 > N1520 X3.3430 Y0.6383 I-0.4326 J-0.0699 > N1530 X3.2760 Y0.7515 I-0.5292 J-0.2369 > N1540 X3.1753 Y0.8607 I-0.5980 J-0.4506 > N1550 X3.0402 Y0.9614 I-0.6383 J-0.7153 > N1560 X3.0385 Y0.9624 I-0.0210 J-0.0340 > N1570 G01 X3.0184 Y0.9734 > N1580 G03 X3.0160 Y0.9746 I-0.0192 J-0.0351 > N1590 G01 X2.9933 Y0.9852 > N1600 X2.9915 Y0.9859 > N1610 G03 X2.7999 Y1.0423 I-0.3712 J-0.9078 > N1620 X2.4536 Y1.0921 I-0.6162 J-3.0561 > N1630 X1.0521 Y1.1104 I-0.8300 J-9.9192 > N1640 X0.5711 Y1.0664 I0.3114 J-6.0609 > N1650 X0.1171 Y0.8986 I0.0643 J-0.8722 > N1660 G01 X0.1156 Y0.8975 > N1670 G03 X-0.0011 Y0.7492 I0.2692 J-0.3319 > N1680 G01 X-0.0013 Y0.7487 > N1690 G03 X-0.0399 Y0.5921 I0.3903 J-0.1793 > N1700 X-0.0305 Y0.4274 I0.7421 J-0.0400 > N1710 G01 X-0.0136 Y0.3285 > N1720 G02 X-0.0917 Y0.3951 I-0.0789 J-0.0134 > N1730 G01 X0.0086 Y0.3941 > N1740 X0.0858 Y0.3934 > N1750 X0.0875 > N1760 X0.1057 Y0.3939 > N1770 G03 X0.1096 Y0.3943 I-0.0012 J0.0400 > N1780 G01 X0.2216 Y0.4086 > N1790 G02 X0.4991 Y0.4258 I0.3114 J-2.7878 > N1800 X0.8267 Y0.4003 I0.0303 J-1.7325 > N1810 G03 X0.8297 Y0.3999 I0.0069 J0.0394 > N1820 G02 X0.9309 Y0.3687 I-0.0259 J-0.2637 > N1830 X0.9559 Y0.3383 I-0.0353 J-0.0545 > N1840 G01 X0.9562 Y0.3376 > N1850 G02 X0.9505 Y0.2731 I-0.0639 J-0.0268 > N1860 G01 X0.9446 Y0.2661 > N1870 X0.9372 Y0.2589 > N1880 X0.9275 Y0.2512 > N1890 G02 X0.8496 Y0.2178 I-0.1266 J0.1875 > N1900 G01 X0.8489 Y0.2176 > N1910 G02 X0.7284 Y0.2064 I-0.0985 J0.4067 > N1920 G01 X0.6882 Y0.2102 > N1930 X0.6828 Y0.2110 > N1940 X0.6090 Y0.2219 > N1950 M05 > N1960 M121 M05 > N1970 G0 G53 Z0 > N1980 G54 G0X0Y0 > N1990 M30 ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
