Hmm, I’ll look into the M codes tomorrow, I can’t recall if those are related to our torch height controller or something else... I ran this on my lathe machine (in Axis SIM) which is also running 2.7.4 on Wheezy and I too didn’t have any problems with it there. I am really at a loss to understand why one machine, with only this one file, freaks out. Very odd…
Thanks, -Tom > On Feb 25, 2016, at 9:03 PM, Lawrence Glaister <ve...@shaw.ca> wrote: > > Hi Tom, > very bazaar videos... almost like its toggling between imperial and > metric mode (x extent jumping between 1.x and 3.x) > > I ran the code on 2.5.4 simulator mode and other than having to remove > the M120 and M121 codes it seems to run properly (other that z > positioning as noted in header). > > Is it possible there is something hinky in your custom M codes? > > cheers > > Lawrence VE7IT > > On 16-02-25 02:55 PM, tom-...@bgp.nu <mailto:tom-...@bgp.nu> wrote: >> N0000 (Filename: MW-BottleOpen-v6.ngc) >> N0010 (Post processor: MakerWorksPlasmaCutter.scpost) >> N0020 (***WARNING*** Post processor used) >> N0030 (assumes THC for Z movement) >> N0040 (CODE CONTAINS NO Z MOVEMENTS) >> N0050 (Date: 12/19/2012) >> N0060 G20 (Units: Inches) >> N0070 G90 G40 G64 P0.005 >> N0080 F1 >> N0090 S500 >> N0100 M120 >> N0110 (Part: MW-BottleOpen-v5) >> N0120 (Process: Outside Offset, Inside, T1: MakerWorksPlasmaCutter) >> N0130 G00 X1.7962 Y0.6557 >> N0140 M03 >> N0150 G04 P0.4 >> N0160 G02 X1.7131 Y0.6915 I-0.0236 J0.0595 f85.0 >> N0170 G01 X1.6371 Y0.8827 f85.0 >> N0180 X1.6789 Y0.8908 >> N0190 X1.7402 Y0.7304 >> N0200 G03 X1.8175 Y0.7440 I0.0374 J0.0143 >> N0210 G01 X1.8205 Y0.9183 >> N0220 X1.8806 Y0.9300 >> N0230 X1.9470 Y0.7685 >> N0240 G03 X2.0239 Y0.7845 I0.0370 J0.0152 >> N0250 G01 X2.0207 Y0.9570 >> N0260 X2.0619 Y0.9651 >> N0270 X2.0624 Y0.5375 >> N0280 X2.0113 Y0.5275 >> N0290 X1.9282 Y0.7237 >> N0300 G03 X1.8513 Y0.7087 I-0.0368 J-0.0156 >> N0310 G01 X1.8477 Y0.4958 >> N0320 X1.7950 Y0.4855 >> N0330 X1.7131 Y0.6915 >> N0340 M05 >> N0350 G00 X0.7799 Y0.6912 >> N0360 M03 >> N0370 G04 P0.4 >> N0380 G02 X0.7106 Y0.6329 I-0.0638 J0.0055 >> N0390 G03 X0.5616 Y0.6403 I-0.1780 J-2.0710 >> N0400 X0.2693 Y0.6220 I-0.0146 J-2.1141 >> N0410 G01 X0.2685 Y0.6219 >> N0420 X0.1678 Y0.6066 >> N0430 G02 X0.1795 Y0.6503 I0.2472 J-0.0428 >> N0440 X0.2267 Y0.7216 I0.1910 J-0.0751 >> N0450 G01 X0.2408 Y0.7348 >> N0460 G02 X0.5562 Y0.8570 I0.3652 J-0.4745 >> N0470 G03 X0.5585 Y0.8573 I-0.0033 J0.0399 >> N0480 G01 X0.7034 Y0.8778 >> N0490 X0.7816 Y0.8874 >> N0500 X0.8492 Y0.8946 >> N0510 X0.9015 Y0.8991 >> N0520 Y0.6075 >> N0530 G03 X0.7106 Y0.6329 I-0.3689 J-2.0456 >> N0540 M05 >> N0550 G00 X2.5213 Y0.6125 >> N0560 M03 >> N0570 G04 P0.4 >> N0580 G02 X2.4545 Y0.5514 I-0.0639 J0.0028 >> N0590 G03 X2.2948 Y0.5554 I-0.1875 J-4.2415 >> N0600 G01 X2.2948 Y0.9045 >> N0610 X2.3076 Y0.9036 >> N0620 X2.3609 Y0.8981 >> N0630 X2.5724 Y0.8725 >> N0640 X2.6389 Y0.8631 >> N0650 X2.6956 Y0.8540 >> N0660 X2.7452 Y0.8448 >> N0670 X2.7463 Y0.8446 >> N0680 G02 X2.9341 Y0.7860 I-0.1051 J-0.6668 >> N0690 X3.0578 Y0.6898 I-0.4015 J-0.6444 >> N0700 X3.1609 Y0.5424 I-0.3007 J-0.3200 >> N0710 G01 X3.1646 Y0.5320 >> N0720 X3.1688 Y0.5167 >> N0730 G02 X3.1751 Y0.4692 I-0.1656 J-0.0463 >> N0740 G01 X3.1632 Y0.4695 >> N0750 X3.1365 Y0.4718 >> N0760 X3.0995 Y0.4762 >> N0770 X3.0522 Y0.4832 >> N0780 X2.9981 Y0.4921 >> N0790 G03 X2.4545 Y0.5514 I-0.7310 J-4.1823 >> N0800 M05 >> N0810 G00 X1.3863 Y0.7472 >> N0820 M03 >> N0830 G04 P0.4 >> N0840 G02 X1.4696 Y0.7119 I0.0240 J-0.0593 >> N0850 G01 X1.5476 Y0.5189 >> N0860 X1.5064 Y0.5110 >> N0870 X1.4447 Y0.6721 >> N0880 G03 X1.3674 Y0.6580 I-0.0374 J-0.0143 >> N0890 G01 X1.3665 Y0.4838 >> N0900 X1.3061 Y0.4720 >> N0910 X1.2383 Y0.6322 >> N0920 G03 X1.1615 Y0.6159 I-0.0368 J-0.0156 >> N0930 G01 X1.1646 Y0.4445 >> N0940 X1.1224 Y0.4363 >> N0950 X1.1203 Y0.8636 >> N0960 X1.1732 Y0.8738 >> N0970 X1.2563 Y0.6773 >> N0980 G03 X1.3331 Y0.6922 I0.0368 J0.0156 >> N0990 G01 X1.3367 Y0.9058 >> N1000 X1.3874 Y0.9156 >> N1010 X1.4696 Y0.7119 >> N1020 M05 >> N1030 G00 X0.5238 Y0.2526 >> N1040 M03 >> N1050 G04 P0.4 >> N1060 G02 X0.6090 Y0.2219 I0.0273 J-0.0579 >> N1070 G01 X0.6408 Y0.1544 >> N1080 X0.6597 Y0.1143 >> N1090 X0.6911 Y0.0366 >> N1100 G03 X0.6923 Y0.0338 I0.0371 J0.0150 >> N1110 G01 X0.7011 Y0.0161 >> N1120 G03 X0.7033 Y0.0123 I0.0358 J0.0178 >> N1130 G01 X0.7119 Y-0.0012 >> N1140 G03 X0.7169 Y-0.0074 I0.0337 J0.0216 >> N1150 G01 X0.7188 Y-0.0094 >> N1160 G03 X0.7386 Y-0.0206 I0.0287 J0.0279 >> N1170 G01 X0.7511 Y-0.0234 >> N1180 G03 X0.7563 Y-0.0243 I0.0089 J0.0390 >> N1190 G01 X0.8105 Y-0.0293 >> N1200 X0.8120 Y-0.0294 >> N1210 G03 X1.2224 Y-0.0387 I0.3454 J6.1906 >> N1220 G01 X1.2953 Y-0.0375 >> N1230 X1.2961 >> N1240 X1.3530 Y-0.0354 >> N1250 X1.3540 >> N1260 X1.3960 Y-0.0328 >> N1270 X1.3975 Y-0.0327 >> N1280 X1.4266 Y-0.0298 >> N1290 G03 X1.4288 Y-0.0295 I-0.0039 J0.0398 >> N1300 G01 X1.4477 Y-0.0266 >> N1310 G03 X1.4512 Y-0.0259 I-0.0061 J0.0395 >> N1320 G01 X1.4624 Y-0.0231 >> N1330 G03 X1.4684 Y-0.0211 I-0.0096 J0.0388 >> N1340 G01 X1.4743 Y-0.0186 >> N1350 G03 X1.4826 Y-0.0139 I-0.0156 J0.0368 >> N1360 G01 X1.5138 Y0.0093 >> N1370 G03 X1.5164 Y0.0114 I-0.0238 J0.0321 >> N1380 G01 X1.5351 Y0.0278 >> N1390 G03 X1.5379 Y0.0306 I-0.0264 J0.0300 >> N1400 G01 X1.6476 Y0.1483 >> N1410 G02 X1.7886 Y0.2584 I0.4049 J-0.3733 >> N1420 G01 X1.8125 Y0.2705 >> N1430 G02 X2.2395 Y0.3502 I0.3942 J-0.9280 >> N1440 G01 X2.2413 Y0.3502 >> N1450 G02 X2.8890 Y0.3022 I0.0482 J-3.7421 >> N1460 G01 X3.0740 Y0.2728 >> N1470 G03 X3.2137 Y0.2661 I0.0976 J0.5703 >> N1480 X3.3451 Y0.3425 I-0.0112 J0.1705 >> N1490 G01 X3.3455 Y0.3431 >> N1500 G03 X3.3768 Y0.4273 I-0.1827 J0.1159 >> N1510 X3.3763 Y0.5277 I-0.3110 J0.0485 >> N1520 X3.3430 Y0.6383 I-0.4326 J-0.0699 >> N1530 X3.2760 Y0.7515 I-0.5292 J-0.2369 >> N1540 X3.1753 Y0.8607 I-0.5980 J-0.4506 >> N1550 X3.0402 Y0.9614 I-0.6383 J-0.7153 >> N1560 X3.0385 Y0.9624 I-0.0210 J-0.0340 >> N1570 G01 X3.0184 Y0.9734 >> N1580 G03 X3.0160 Y0.9746 I-0.0192 J-0.0351 >> N1590 G01 X2.9933 Y0.9852 >> N1600 X2.9915 Y0.9859 >> N1610 G03 X2.7999 Y1.0423 I-0.3712 J-0.9078 >> N1620 X2.4536 Y1.0921 I-0.6162 J-3.0561 >> N1630 X1.0521 Y1.1104 I-0.8300 J-9.9192 >> N1640 X0.5711 Y1.0664 I0.3114 J-6.0609 >> N1650 X0.1171 Y0.8986 I0.0643 J-0.8722 >> N1660 G01 X0.1156 Y0.8975 >> N1670 G03 X-0.0011 Y0.7492 I0.2692 J-0.3319 >> N1680 G01 X-0.0013 Y0.7487 >> N1690 G03 X-0.0399 Y0.5921 I0.3903 J-0.1793 >> N1700 X-0.0305 Y0.4274 I0.7421 J-0.0400 >> N1710 G01 X-0.0136 Y0.3285 >> N1720 G02 X-0.0917 Y0.3951 I-0.0789 J-0.0134 >> N1730 G01 X0.0086 Y0.3941 >> N1740 X0.0858 Y0.3934 >> N1750 X0.0875 >> N1760 X0.1057 Y0.3939 >> N1770 G03 X0.1096 Y0.3943 I-0.0012 J0.0400 >> N1780 G01 X0.2216 Y0.4086 >> N1790 G02 X0.4991 Y0.4258 I0.3114 J-2.7878 >> N1800 X0.8267 Y0.4003 I0.0303 J-1.7325 >> N1810 G03 X0.8297 Y0.3999 I0.0069 J0.0394 >> N1820 G02 X0.9309 Y0.3687 I-0.0259 J-0.2637 >> N1830 X0.9559 Y0.3383 I-0.0353 J-0.0545 >> N1840 G01 X0.9562 Y0.3376 >> N1850 G02 X0.9505 Y0.2731 I-0.0639 J-0.0268 >> N1860 G01 X0.9446 Y0.2661 >> N1870 X0.9372 Y0.2589 >> N1880 X0.9275 Y0.2512 >> N1890 G02 X0.8496 Y0.2178 I-0.1266 J0.1875 >> N1900 G01 X0.8489 Y0.2176 >> N1910 G02 X0.7284 Y0.2064 I-0.0985 J0.4067 >> N1920 G01 X0.6882 Y0.2102 >> N1930 X0.6828 Y0.2110 >> N1940 X0.6090 Y0.2219 >> N1950 M05 >> N1960 M121 M05 >> N1970 G0 G53 Z0 >> N1980 G54 G0X0Y0 >> N1990 M30 > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > <http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140> > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net <mailto:Emc-users@lists.sourceforge.net> > https://lists.sourceforge.net/lists/listinfo/emc-users > <https://lists.sourceforge.net/lists/listinfo/emc-users> ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
