On 9 March 2016 at 05:29, Gene Heskett <[email protected]> wrote: > One thing I learned, it seems a g43 TLO comp enable, is cumulative,
No, it isn't. But you can end up increasing the tool length offset by a sequence of tool-touch-off and work-touch-off actions. I think you need to sit back and clarify in your head the way that the absolute axis positions, G54 offsets and tool-length offsets interact, and how LinuxCNC uses those numbers in calculating values for the various varieties of G10 command. In the Axis GUI Tool-Touch-Off is equivalent to G10 L10 http://linuxcnc.org/docs/2.7/html/gcode/g-code.html#gcode:g10-l10 The "other" touch-off (I am still on 2.6 so only have one button still) is G10 L20 http://linuxcnc.org/docs/2.7/html/gcode/g-code.html#gcode:g10-l20 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Transform Data into Opportunity. Accelerate data analysis in your applications with Intel Data Analytics Acceleration Library. Click to learn more. http://pubads.g.doubleclick.net/gampad/clk?id=278785111&iu=/4140 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
