Sorry I didn't type the complete sentence: "So you're saying [HALUI] in a
supplemental .ini file won't work?" was what I was shooting for.
Looking over the other stuff. This looks like a GREAT help!
Is it ok that [XHC_HB04_BUTTONS],[XHC_HB04_CONFIG], [EMC], and [APPLICATIONS]
are still in that layout20.ini file and not the main .ini?
There is already an [EMC] in the main .ini:
MACHINE = HM2-Stepper
DEBUG = 0
layout20.ini additionally has:
[EMC]
MACHINE = xhc-hb04 layout2
Is this ok? Do they just combine into what's effectively "MACHINE= HM2-Stepper
xhc-hb04 layout2"?
Danny
---- Gene Heskett <ghesk...@wdtv.com> wrote:
> On Wednesday 20 April 2016 11:31:28 dan...@austin.rr.com wrote:
>
> > So you're saying [HALUI] in a supplemental .ini file?
> > Alright, that sounds like the problem!
> >
> Not supplemental, but in the ini file as a marked [HALUI] section.
> Taken from the top of my ini file, the important parts:
> =====================SOF===============
> [DISPLAY]
> DISPLAY = axis
> PYVCP = pyvcp-panel.xml
> ====================EOF===============
> this pyvcp_panel.xml was a community developed file, a bit long, but here
> it is after I elide some commented out code:
> ====================SOF==================
> <U+FEFF><?xml version='1.0' encoding='UTF-8'?>
>
> <pyvcp>
> <!--
> Include your PyVCP panel here.
> The contents of this file will not be overwritten when you run stepconf
> again.
> -->
> <!-- the RPM meter -->
> <hbox>
> <relief>RAISED</relief>
> <bd>3</bd>
> <meter>
> <halpin>"spindle_rpm"</halpin>
> <text>"Spindle"</text>
> <subtext>"RPM"</subtext>
> <size>235</size>
> <min_>0</min_>
> <max_>2750</max_>
> <majorscale>500</majorscale>
> <minorscale>100</minorscale>
> <region1>0,2250,"green"</region1>
> <region2>2250,2600,"yellow"</region2>
> <region3>2600,2750,"red"</region3>
> </meter>
> </hbox>
>
> <hbox>
> <vbox>
> <relief>RAISED</relief>
> <bd>2</bd>
> <label>
> <text>"SPWR"</text>
> <font>("Helvetica",12)</font>
> </label>
> <rectled>
> <halpin>"on-led"</halpin>
> <height>"20"</height>
> <width>"72"</width>
> <on_color>"green"</on_color>
> <off_color>"red"</off_color>
> </rectled>
> </vbox>
>
> <vbox>
> <relief>RAISED</relief>
> <bd>2</bd>
> <label>
> <text>"FWD"</text>
> <font>("Helvetica",12)</font>
> </label>
> <rectled>
> <halpin>"fwd-led"</halpin>
> <height>"20"</height>
> <width>"72"</width>
> <on_color>"green"</on_color>
> <off_color>"red"</off_color>
> </rectled>
> </vbox>
>
> <vbox>
> <relief>RAISED</relief>
> <bd>2</bd>
> <label>
> <text>"REV"</text>
> <font>("Helvetica",12)</font>
> </label>
> <rectled>
> <halpin>"rev-led"</halpin>
> <height>"20"</height>
> <width>"72"</width>
> <on_color>"green"</on_color>
> <off_color>"red"</off_color>
> </rectled>
> </vbox>
> </hbox>
> <!-- The following is added to your .xml file inside the <pyvcp> </pyvcp>
> tags -->
> <!-- here we have to re-invent the camview missing stuffs -->
> <labelframe text="Calibrate machine">
> <button>
> <halpin>"checkbutton1"</halpin>
> <text>"CamOn"</text>
> <font>('Helvetica',10)</font>
> </button>
> <hbox>
> <button>
> <halpin>"button1"</halpin>
> <text>"CamOff"</text>
> <font>('Helvetica',10)</font>
> </button>
> <button>
> <halpin>"button2"</halpin>
> <text>"CamStor"</text>
> <font>('Helvetica',10)</font>
> </button>
> <button>
> <halpin>"button3"</halpin>
> <text>"CamCtr4"</text>
> <font>('Helvetica',10)</font>
> </button>
> </hbox>
> </labelframe>
>
> <!-- and last, the alignment stuff -->
>
> <labelframe text="Align Sheet">
> <button>
> <halpin>"align-start"</halpin>
> <text>"Align Start"</text>
> <font>('Helvetica',10)</font>
> </button>
> <hbox>
> <button>
> <halpin>"align-y"</halpin>
> <text>"Align Y"</text>
> <font>('Helvetica',10)</font>
> </button>
> <button>
> <halpin>"align-x"</halpin>
> <text>"Align X"</text>
> <font>('Helvetica',10)</font>
> </button>
> </hbox>
> <button>
> <halpin>"clear-offset"</halpin>
> <text>"Clear Offset"</text>
> <font>('Helvetica',10)</font>
> </button>
> </labelframe>
> </pyvcp>
> ================EOF===============
>
> then later,
> Example from my .ini for a G0704 I'm still tuning for original mistakes.
> ==================SOF===============
> [HAL]
> HALUI = halui
> HALFILE = GO704fast.hal
> POSTGUI_HALFILE = postgui_call_list.hal
> SHUTDOWN = shutdown.hal
>
> [HALUI]
> MDI_COMMAND=o<_camon> call
> MDI_COMMAND=o<_camoff> call
> MDI_COMMAND=o<_camstore> call
> MDI_COMMAND=o<_camcenter3> call
> MDI_COMMAND=o<_camcenter4> call
> MDI_COMMAND=o<align_start> call
> MDI_COMMAND=o<align_y> call
> MDI_COMMAND=o<align_x> call
> MDI_COMMAND=o<clear_offset> call
>
> Those are all subroutine calls whose links are created by the postgui
> files that also add a tach, spindle power & direction tallies, and a
> series of clickable buttons that will execute those above HALUI
> commands.
>
> postgui_call_list.hal:
> source postgui.hal
>
> This may not be 100% correct as its being taken out of context, but it
> should serve as a somewhat poor tutorial to show what can be done. I've
> abused the list enough by posting the .xml file already.
>
> > Are there more elements which will only work if placed in the main
> > .ini file?
> >
> > layout20.ini has [XHC_HB04_BUTTONS], [EMC], [HAL], [XHC_HB04_CONFIG],
> > and [APPLICATIONS].
> >
> > I'm guessing [EMC] and [HAL] need to be in the main .ini, right? What
> > about [APPLICATIONS]?
> >
> >
> > [XHC_HB04_BUTTONS]
> > step = xhc-hb04.stepsize-up
> > spindle = halui.spindle.start
> >
> > So, the step size did not go up when I pressed the button. Spindle
> > didn't start. Those are NOT an MDI, so I still have another problem,
> > right? What might it be?
>
> Best guess is that the action from the jog wheel kit is not all properly
> linked in your hal file. Clear dmesg by running it as root
> with "dmesg -c", then run LCNC and stop it after its finished loading,
> then run as root, "dmesg". Screen copy it to get a list of everything it
> found, then check your hal file to see if its in there, both as a source
> for a "net" "name" "source_of_sig" "where_it_goes". The latter can be a
> space/tab separated list. If the list is too long, add another
> identical "net name" line anyplace below the first one, and continue
> your list of "where_it_goes". Hal will append them when the duplicate
> net name is found later.
>
> > Danny
> >
> > ---- andy pugh <bodge...@gmail.com> wrote:
> > > On 20 April 2016 at 07:29, Danny Miller <dan...@austin.rr.com>
> > > wrote: IIRC the halui.mdi-command-01 etc didn't seem to exist under
> > > halui.
> >
> > Those pins are created by halui based on the MDI_COMMAND entries in
> > the [HALUI] section of the main INI file.
> >
> > So, you need to find or create a [HALUI] section in your main .ini
> > file (as many as you need) and each one will define a single-line
> > G-code command that will be run when the corresponding HAL pin is
> > triggered.
> >
> > http://linuxcnc.org/docs/2.7/html/config/ini-config.html#_halui_sectio
> >n
> >
> > For more complex actions your MDI_COMMAND can be a subroutine call
> > such as O<machine_interocitor> CALL
>
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
> ------------------------------------------------------------------------------
> Find and fix application performance issues faster with Applications Manager
> Applications Manager provides deep performance insights into multiple tiers of
> your business applications. It resolves application problems quickly and
> reduces your MTTR. Get your free trial!
> https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Find and fix application performance issues faster with Applications Manager
Applications Manager provides deep performance insights into multiple tiers of
your business applications. It resolves application problems quickly and
reduces your MTTR. Get your free trial!
https://ad.doubleclick.net/ddm/clk/302982198;130105516;z
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
