Have you looked at Sheetcam. It is very good for flame and plasma and will not break the bank at £110-00. It is a once of cost.
------ Original Message ------ From: "Bruce Layne" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: 2016-05-12 07:55:00 Subject: Re: [Emc-users] CAD/CAM for LinuxCNC >2D CAD and DXF2GCODE is a powerful and fairly simple combination, >particularly for the more inherently 2D machines such as routers, >lasers, etc. > >LibreCAD was forked from QCad. It might be easier to find LibreCAD in >some Linux repositories. > >http://librecad.org/cms/home.html > > > >On 05/12/2016 12:55 AM, Kirk Wallace wrote: >> I don't know if it has be mentioned earlier, but qCAD and DXF2gCode >>can >> be quite handy as in a free beer sense using Linux programs. In the >> past, I have drawn tool paths in qCAD and have had DXF2gCode do the >> rest. I have noticed some activity on the DXF2gCode list recently, so >> there may be more features available. There may even be some 3D >>features. >> > > >------------------------------------------------------------------------------ >Mobile security can be enabling, not merely restricting. Employees who >bring their own devices (BYOD) to work are irked by the imposition of >MDM >restrictions. Mobile Device Manager Plus allows you to control only the >apps on BYO-devices by containerizing them, leaving personal data >untouched! >https://ad.doubleclick.net/ddm/clk/304595813;131938128;j >_______________________________________________ >Emc-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Mobile security can be enabling, not merely restricting. Employees who bring their own devices (BYOD) to work are irked by the imposition of MDM restrictions. Mobile Device Manager Plus allows you to control only the apps on BYO-devices by containerizing them, leaving personal data untouched! https://ad.doubleclick.net/ddm/clk/304595813;131938128;j _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
