I have no idea if this is even possible but a 7i90 is cheaper than a 7i69, and would have 3 50 pin headers. Would it be possible to have one 7i80 with a 7i46 and plug 2 7i90 cards into that?
----- Original Message ----- From: "sam sokolik" <sa...@empirescreen.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Tuesday, May 31, 2016 9:46:44 AM Subject: Re: [Emc-users] Multpile 7i80HD's from one PC I would use 1 - 7i80 and 1 - 7i44 Then you can use a bunch of 7i69's (each has 2 50 pin connectors) On 5/31/2016 8:36 AM, Rick Lair wrote: > Good Morning Guys, > > I was wondering, is it possible to run 3 7i80HD's off of one PC. > > We have an Okuma bridge mill that we just installed, and it has an off > brand retrofitted control on it, that we are having problems getting > running. When it was retrofitted they used Opto22 I/O boards, and there > are 6 of them, so I was figuring 3 7i80HD's or even 3 5i23's would allow > me to hook up all 6 I/O boards along with a 7i48 to control the servo's > and encoder feedback. > > ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
