Might be easier depending on what you are trying to do.. launch the config picker, select the config you want and then check the 'create short cut on desktop' or whatever the check box says on the config picker.
Then the shortcut launches linuxcnc normally Sam On Sat, 26 Nov 2016 11:26:03 +0000 andy pugh <bodge...@gmail.com> wrote: > On 26 November 2016 at 09:14, giorgio foga <giorgiof...@hotmail.it> wrote: > > > Question 2) there are a simple way to run Lcnc whitout .rip-environment > > script?? > > There is an easy way, but it is (apparently) not recommended because > it makes uninstall and updates difficult. > > There is an extra switch for ./configure: > ./configure --with-realtime=upace --prefix=/usr > > That will put all the files in the "normal" place rather than the > run-in-place directory. > > I would suggest waiting a while to see if anyone can say what the > "approved" way is. Though the chaps in the US are likely to be > distracted by Thanksgiving this weekend, I think. > > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
