Sorry at all ... I try to launch my config with bash script but with wrong path
.... so not run at all ....
Regards
Giorgio
________________________________
Da: giorgio foga <giorgiof...@hotmail.it>
Inviato: sabato 26 novembre 2016 16.23
A: emc-users@lists.sourceforge.net
Oggetto: Re: [Emc-users] run Lcnc ubuntu 14.04 rt_preempt 4.1.5 whithout
rip-environment script
I have only 1 install on ubuntu 14.04 and normally run whitout guy.... with
nogui script as you suggest me in the past.
I try using bash script but probably I use wrong folder.... (Not see git in my
path... I must control... I'm not in front of machine. ).
Tomorrow morning I controlli my path.
Other question....
After Rip scrip not find halcompile command?? I use wrong path??
Regards
Giorgio
________________________________
Da: Dewey Garrett <dgarr...@panix.com>
Inviato: sabato 26 novembre 2016 15.52.26
A: emc-users@lists.sourceforge.net
Oggetto: Re: [Emc-users] run Lcnc ubuntu 14.04 rt_preempt 4.1.5 whithout
rip-environment script
> If you launch the chooser from the RIP environment,
> the shortcut will launch the RIP LinuxCNC version
Yes --- but there is no guarantee that the environment
is set as required.
If you
1) have a run-in-place build
2) source the rip-environment script in a shell
3) then run linuxcnc (with no args) from that shell
(or any shell with the required rip-enviroment
settings)
then the config picker will create a desktop icon.
For example, with a RIP build root directory named
'/home/git/linuxcnc-dev', the desktop file created
(for the axis sim example) will be:
$ cat ~/Desktop/axis.desktop
[Desktop Entry]
Name=LinuxCNC-sim-axis
Exec=/home/git/linuxcnc-dev/scripts/linuxcnc
'/home/git/linuxcnc-dev/configs/sim/axis/axis.ini'
Type=Application
Comment=
Icon=linuxcncicon
However, startup using this icon does not source the
required rip-environment script. If you have a deb install
in addition to a RIP build, this might or might not work
depending upon the version-similarity of the two
configurations.
Knowledgeable linux users (using bash by default) could use
~/.profile or ~.bashrc to set the appropriate run-in-place
environment but there is a great potential for problems if
you have both a deb install and a run-in-place build on the
same machine.
The safest means to run a hand-built LinuxCNC without the
need for separately setting up the environment is to make
and install a deb as documented:
http://linuxcnc.org/docs/devel/html/code/building-linuxcnc.html#_building_debian_packages
ref:
https://forum.linuxcnc.org/27-driver-boards/31881-7i77-5i25-hm2-pci-unloaded?start=40#83286
--
Dewey Garrett
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Emc-users Info Page -
SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users>
lists.sourceforge.net
This list is for users of the Enhanced Machine Controller (EMC). Topics include
how to obtain, install, configure, and use EMC, as well as other general EMC
related ...
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Emc-users Info Page -
SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users>
lists.sourceforge.net
This list is for users of the Enhanced Machine Controller (EMC). Topics include
how to obtain, install, configure, and use EMC, as well as other general EMC
related ...
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
