On Tue, 2017-02-21 at 11:37 -0600, Jim Craig wrote: > MIC-6 is particularly gummy when machining. I always use coolant and I > still get a little bit of chip weld if things aren't just right.
I have a machine which comes without air blast nor coolant, I use spray coolant WD-40 and I use a tool of 6mm diameter, feed rate from 300mm/min to 500mm/min ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
