On Monday 27 February 2017 11:42:53 Sebastian Kuzminsky wrote: > On 02/27/2017 09:35 AM, Gene Heskett wrote: > > And, I just checked, formatted the .list file entry according to the > > wheezy entries at http://buildbot.linuxcnc.org/ and there is not an > > entry in the repos to match a wheezy i386 install, which this is > > because yonks ago, when I installed wheezy, lcnc didn't run on 64 > > bit installs, so I've been running an i386 install, with whichever > > kernel had an actually works PAE, without which I'm a gigabyte into > > swap in just a few hours. The error message from apt-get update is: > > > > W: Failed to fetch http://linuxcnc.org/dists/wheezy/Release Unable > > to find expected entry '2.7-rtpreempt/binary-i386/Packages' in > > Release file (Wrong sources.list entry or malformed file) > > Unfortunately the apt sources for the buildbot and for the main > archive at www.linuxcnc.org use slightly different URLs. > > The "2.7-rtpreempt" component you're using is for the buildbot, not > for www.linuxcnc.org. > > The matching component on www.linuxcnc.org is "2.7-uspace". The apt > source line should look like this: > > deb http://linuxcnc.org/ wheezy base 2.7-uspace > And that, Seb, while not identical to what I did have, offers me the exact same thing that is currently installed. No 2.8-pre whatever in sight. Which is whats running on the other 3 real machines.
> > Here's the relevant docs, for reference: > > http://linuxcnc.org/docs/2.7/html/getting-started/getting-linuxcnc.htm >l#_alternate_install_methods Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
