Andy, where does that part go in a 4th axis assembly? Is that a cam lock component ??
Thanks, Dave On 3/22/2017 5:40 AM, andy pugh wrote: > On 22 March 2017 at 02:55, Chris Albertson <albertson.ch...@gmail.com> wrote: >> I missed the beginning of this thread. But the thing used to cut square >> internal corners is a "broach". > Yes, I know. And I have both used and made them in the past. > http://bodgesoc.blogspot.de/2014/11/the-last-bits-and-pieces.html > But this is a short, blind hole. > > I am pretty sure that a wobble-broach would have worked well, but at > £8 + VAT + delivery I decided that I couldn't be bothered to make the > parts. > (Especially as the cam profile appears to be non-circular but not > defined by the standard) > > I have attached the relevant page, but I would be surprised if it gets > through the mailing list software. > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
