Andy
I really like your Idea of using the Cam lock approach for a 4Axis
chuck adapter. In my case I have 3 chucks for my lathe that uses D1-5
spindle so it gives much versatility If I could also use them on my 4th
Axis. How are you approaching this project? I am assuming that you
are starting with a plate that will be attached to the 4th axis and
machining that plate to accept the cam lock studs and cam locks. In my
case I can get a complete set(6 ea) of locks from my Lathe source for US
$36. Are there any precautions that I should watch for when I attempt
this project?
Hubert Bahr
On 3/22/17 6:40 PM, andy pugh wrote:
> On 22 March 2017 at 23:33, Dave Cole <[email protected]> wrote:
>> OK... 4th axis chuck. I get it.
> Well, to be clear, a 4th-axis spindle-nose
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
