On Wednesday 22 March 2017 10:04:52 andy pugh wrote: > On 22 March 2017 at 12:05, Gene Heskett <ghesk...@shentel.net> wrote: > > That style isn't what I had in mind, Andy. External drive & extract > > flange. > > Like these? > http://bodgesoc.blogspot.de/2017/01/gears.html > > :-)
Same basic idea Andy, but uses more length because of the external flange. Those are designed for very narrow locations. Did you make those? These, if not countersunk into the hollowed out face of the pulley, would add about 1/2" to the width of the space on the shaft. Better pix, left face of 80 tooth gear here is 1 of the two I made: <http://geneslinuxbox.net:6309/gene/lathe-stf/lathe-pix/motor-driving-Z-ball-screw-small.JPG> But this pulley's recess can hide that flange to a large extent. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
