It works, but... And this is a big but. If an operator or machine file changes the g64 setting, it will not be changed back to that default start up setting until the next time Linuxcnc is closed and restarted. This is why a proper proper file preamble for your g-code files is so important. Another possible work around would be a script that adds the correct g64p0.005 (or what ever the chosen tolerance is) to the first line of every file when Linuxcnc opens it. It could be over-ridden by adding another g64 line saved in the file.
----- Original Message ----- From: "sam sokolik" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Wednesday, March 29, 2017 3:02:26 PM Subject: Re: [Emc-users] Version 2.7 positioning problem during cnc operations Does that work? I tried that on 2.7 sim and it didn't seem to work. (unless I was doing something stupid) On 3/29/2017 1:54 PM, Tomas J wrote: >> Currently the fix is adding G64Px.xxx at the beginning of all programs. > Or add "RS274NGC_STARTUP_CODE = G64 P0.02" to [RS274NGC] section of .ini > file... > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
