Once 2.8 is released I would switch to it _unless_ you need some feature in the new Master. This way you get bug fixes only and nothing that could be a show stopper... or a surprise.
JT On 3/30/2017 11:45 AM, Joe Hildreth wrote: > John, > > Thank you again for the help and information. I will try this out when I get > home. One last question, when 2.8 is released, is it a matter then of just > changing the software sources to be on that release or would it be best to > just keep on the buildbot sources? > > Thank you again for your help. > > Regards, > > Joe Hildreth > > ----- On Mar 30, 2017, at 11:35 AM, John Thornton [email protected] wrote: > >> Hi Joe, >> >> http://buildbot.linuxcnc.org/ >> >> You just need to change the deb line in the synaptic package manager to >> point to: >> >> deb http://buildbot.linuxcnc.org/ precise master-rtpreempt >> and >> deb-src http://buildbot.linuxcnc.org/ precise master-rtpreempt >> >> and follow the instructions to add the key. >> JT > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
