On 30 March 2017 at 20:07, John Kasunich <[email protected]> wrote: > I'm not in a position to do it, but I wonder how hard it would be to grep > thru the code to see if those parameters are used? If they're not, they > should be deleted from the sample configs.
Checked here: https://github.com/LinuxCNC/linuxcnc/blob/af15a4d90e1d51d5309db65fe1c9511e486df411/src/emc/motion/usrmotintf.cc#L61 Only used once, here: https://github.com/LinuxCNC/linuxcnc/blob/af15a4d90e1d51d5309db65fe1c9511e486df411/src/emc/motion/usrmotintf.cc#L100 (And there is a default set) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
