Check that any fans are running ok and mb and cards are clean. I've had video card fans get dirty and stop working and freeze the pc as well as cpu fans that fail and when the cpu overheats it just shuts down.
JT On 4/5/2017 9:30 AM, Todd Zuercher wrote: > I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One of which > seems to be locked into staying with it because of Hardware limitations (an > ISA interface card). In the past week one of those machines started freezing > up while running Linuxcnc. Fortunately it wasn't the machine that can't run > on Wheezy, so yesterday in frustration I installed the Wheezy ISO in a > separate partition and that seems to have stopped the problem. My other old > installation is still working happily. One of the main differences between > the two machines is the one that was acting up has a Gladevcp, and the one > that is still working has a Pyvcp. Where should I start looking for debugging > info, to help find what is going wrong on the one machine? > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
