On Wednesday 05 April 2017 13:09:36 Jon Elson wrote: > On 04/05/2017 09:30 AM, Todd Zuercher wrote: > > I still have (had) 2 machines running Linuxcnc on Ubuntu 10.04. One > > of which seems to be locked into staying with it because of Hardware > > limitations (an ISA interface card). In the past week one of those > > machines started freezing up while running Linuxcnc. Fortunately it > > wasn't the machine that can't run on Wheezy, so yesterday in > > frustration I installed the Wheezy ISO in a separate partition and > > that seems to have stopped the problem. My other old installation is > > still working happily. One of the main differences between the two > > machines is the one that was acting up has a Gladevcp, and the one > > that is still working has a Pyvcp. Where should I start looking for > > debugging info, to help find what is going wrong on the one machine? > > First, I'd run memtest86 for a couple hours. Then, I might > reseat all I/O cards and memory. Most likely, if a machine > BEGINS to act up after working reliably for a long time, it > is NOT software. > > Jon > Not to mention the tops of all the caps around the cpu socket need looked at for both leakage and/or swelled tops. > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users