On Thu, 6 Apr 2017, Andrew wrote: > Date: Thu, 6 Apr 2017 22:22:25 +0300 > From: Andrew <pkm...@gmail.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: [Emc-users] Mesa 7i47S issue > > Hello! > > I've been testing 7i80 (7i80hd_16_svst1_4_7i47s.bit) with 7i47S. > According to the manual and hm2 load report I should have stepgen0..3 at > TX0...TX7 outputs. > But what I seem to have is stepgen0..1 at TX4...7, stepgen2..3 is at TX0..3. > This is pretty confusing. > Or am I missing something? > > Thanks, > Andrew
As far as I can tell from the source the svst1_4_7i47S does put stepgen 0 at TX4,TX5 Stepgen 1 at TX6,TX7, stepgen 2 at TX0,TX1 and stepgen 3 at TX2,TX3 > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users