If you upload a file to the wiki it is there till rapture... JT
On 4/12/2017 11:40 AM, Gene Heskett wrote: > Greetings all; > > Looking for ideas I could snarf, I went to the wiki and while the wiki is > a decade old, all its links to pastebin have expired. Pointing out the > futility of using pastebin for long term storage. > > If whoever did those original wiki entries, and use pastebin links for > the downloadable stuffs, might still have those .py and .xml files > gathering mold & bitrot, could replace the pastebin links with something > that will be valid until the rapture, it would be appreciated. Perhaps > the wiki software has its own facility for the links? > > I see one box in the big display at integrating pyVCP with AXIS > (1jan2007) that would save some screen space if I can also insert a > halpin to control its background color, 4th one down on the right side > of that screenshot. At present I am using a label, and a number box, > stacked vertically, and need to tally a 3rd piece of data for each axis > of these jog wheels. If I can insert an additional halpin to control the > color of the background to indicate status, I could do that w/o wasting > more vertical space. But the descriptions of the boxes I am using do not > indicate an ability to control the background color. > This is what I have today, the bottom 4 boxes in the right panel. > > <http://geneslinuxbox.net:6309/gene/lathe-stf/Sheldon_lathe-pix/> > as newer-sheldon-gui2.jpg > > This was generated by the 3 files: postgui_call_list.hal, postgui.hal, > and pyvcp-panel-tach-status.xml, all available in the same directory. > > The whole maryann includes: > 7i90-axis.ini > hm2-7i90-stepper.hal > automatic-spindle-gear-detection.hal > > This last I got from one of you, but since I've yet to restore the > countershaft to driving the spindle, is not "fine tuned" and functional > yet. I finished making the first set of bearing driver tools Monday but > honeydo's & taxes & my back have discouraged me from tackling that just > yet, and I've got to make a trip to the eats store before I can start > today. Out of creamed cheese for Dee's breakfast bagel. > > I'll have to pull the bronze ones, then take the pusher back to TLM, and > face the driver at an angle that puts all the push on the outer shell of > the needle cartridge, on its flattened, labeled face, reducing the > chances of bending that face with the push pressure. ATM its square for > pushing on the bronze bearings. > > Code bits posted in case someone wants to borrow something. :) Be my > guest. > > I don't consider that hm2-7i90-stepper.hal is complete as I'm considering > replacing the timedelay module with a retriggerable so it stays active > until 5 seconds after the last dial move. I am getting tired of it > timing out while I was playing, or waiting for it to time out before I > could do a touch-off as doing a touch off while its active does > something odd and it moves when it shouldn't at the end of the timeout > IIRC. > > Cheers, Gene Heskett ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
