On Saturday 29 April 2017 15:17:23 dave wrote: > I finally climbed my shelving and checked the fiber. I found (maybe > 200') of 2.8mm x 2.0 mm. No other information on the reel. In addition > I checked one of my reels of 62.5/125 um Berk-tek plenum fiber. At > least one end is terminated in hot-melt connectors: what ever that > means. It has simply been too long. The reel for the 2.0 mm I think > exceeds the min bending radius for the 62.5/125 so I could add some of > that to the spool with the plastic. Shipping still won't be cheap. > Obviously, no obligation, unless you just can't resist. ;-) > > Dave > I couldn't get any usefull info from the peddlers of fittings for several hours on the phone Monday, so I told myself to forget it. If they don't want to sell the stuff, I can't force them.
Just this afternoon I thru together 4 channels worth of snubbers made out of 1n914's & small bypass caps, which at a fwd drop per each means 6 in series is 3.55 volts, so anything that goes above about 3.6 volts will get shorted out, or anything going below ground by more than .585 volts will get gobbled up. Then I hooked up a poor sub for the home switch I was going to use, but its repeatability is 3 or 4 thou at best with a deadband of nearly 60 thou. That won't do. I do have one more "good" switch but its spst no and I'd druther have nc. And tommorrow is the last day for the last radio shack within 140 miles, maybe all of them. So I'll have to fleabay some & see how repeatable they are I guess. Thanks for the checking though Dave, I appreciate it. > > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
