Not worry, as I can understand today if I wanted to redistribute my work on Lcnc I have to use either linux or debian linux ... so I could run with egalax and debian ... but if i use debian I do not get very excited ... too many bash commands do not answer This is me dry .... but patience I will have to learn new tricks .... so as soon as I have tried it too debian I will let you know.
regards giorgio ________________________________ Da: Jan Bos <rappyrip...@gmail.com> Inviato: giovedì 4 maggio 2017 14.23 A: Enhanced Machine Controller (EMC) Oggetto: Re: [Emc-users] touch screen calibration assistance please Yes, it shows up as an Egalaxy touch, there are actually 2 Egalaxy touch devices listed. I am on Debian so things are slightly different, previously on Ubuntu I could use the drivers and calibration software provided with the screens but they wont work on Debian. As I mentioned, I got it to work but the calibration is not that each time the same, I can see after a reboot that it has changed a little and after several reboots it changes again a little but never enough to have to recalibrate. It stays within the acceptable and usable range. Its working thanks to all your help and that's all that matters to me now, on the real problems now like a coffee maker that blows the fuse when wakes up from stand-by. G21 On Thu, May 4, 2017 at 7:00 PM, giorgio foga <giorgiof...@hotmail.it> wrote: > sorry is an egalax touch?? you are on ubuntu or debian? > > > Ik you have kernel > of 2.6 actually on egalax drive is not need to write > the calibration.conf file ... there are a tool for these .... only you need > to add usbtouch SO drive on blacklist .... > > I think is the same with elo touch... > > > I you work on MS I'm not able to help.... > > > regards > > giorgio > > > ________________________________ > Da: Jan Bos <rappyrip...@gmail.com> > Inviato: mercoledì 3 maggio 2017 06.06 > A: Enhanced Machine Controller (EMC) > Oggetto: Re: [Emc-users] touch screen calibration assistance please > > Thanks everybody for hanging in there with me trying to figure this thing > out. > > I ended up with calibration values as follows: > Option "Calibration" "2025 27 125 1950" in the 99-calibration.conf > > This gets my touch point within 1mm of where I actually touch the screen > with a stylus. I also can get to the edges of the screen on all sides and > all axis are in the correct direction. > > Not sure if this is a multi-touch screen, it actually came as a Windows > Industrial PC where the PC is build into the screen and forms one unit. I > can drag on the screen and actually select files like that, it forms a > 'box' around the files when I drag diagonally over the screen. Touch > response is good also, single click and double click work fine and can be > tweaked also. > > Works fine with Gomoccapy in full screen. > > On to the next challenge. > > Thanks everybody for your help and patience. > > Jan. > > On Wed, May 3, 2017 at 10:51 AM, Stuart Stevenson <stus...@gmail.com> > wrote: > > > Get some sleep. You will think better in the morning. I calibrated mine > but > > don't remember how. I will check in the morning. > > Regarding the two touch screens is it possible you have a multi-touch > > screen? > > > > On May 2, 2017 3:30 PM, "John Thornton" <j...@gnipsel.com> wrote: > > > > And I know the same thing, I made a script to load the file after > > testing... > > > > JT > > > > > > On 5/2/2017 1:39 PM, andy pugh wrote: > > > It is possible to calibrate the screen iteratively by changing the > > > numbers by hand. Don't ask me how I know. > > > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users Emc-users Info Page - SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users> lists.sourceforge.net This list is for users of the Enhanced Machine Controller (EMC). Topics include how to obtain, install, configure, and use EMC, as well as other general EMC related ... > Emc-users Info Page - SourceForge<https://lists.sourceforge.net/lists/ > listinfo/emc-users> > lists.sourceforge.net > This list is for users of the Enhanced Machine Controller (EMC). Topics > include how to obtain, install, configure, and use EMC, as well as other > general EMC related ... > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > Emc-users Info Page - SourceForge<https://lists.sourceforge.net/lists/ > listinfo/emc-users> > lists.sourceforge.net > This list is for users of the Enhanced Machine Controller (EMC). Topics > include how to obtain, install, configure, and use EMC, as well as other > general EMC related ... > > > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Emc-users Info Page - SourceForge<https://lists.sourceforge.net/lists/ > listinfo/emc-users> > lists.sourceforge.net > This list is for users of the Enhanced Machine Controller (EMC). Topics > include how to obtain, install, configure, and use EMC, as well as other > general EMC related ... > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
