On 05/07/17 21:33, Tim wrote: > I have been playing with RPI for some time now trying to get > Hal2Arduino working for a multi-task hobby cnc that I have built. Have > software working for xyza axis still need to hook up drivers and > steppers. I know that linuxcnc is not going to work as well as what > Gene Haskett is doing but this is a hobby machine. Still having > trouble getting xyuv axis part of machine working have a config file > error to figure out. > But the reason why I responded to this post I have instructions on > how to create a minimal install for RPI image that will work on RPI2 > or 3. Seems it could help allot of people, so here it is. > > > Follow these direction in order to make a minamal Raspbian "Debian > Jessie" install > with a realtime kernel,(ver. 4.4.9-rt17) and Mate Desktop and Linuxcnc > sdcard will work with rpi2 or 3 > > Download Emlid image for sd card then extract from > https://files.emlid.com/images/emlid-raspbian-20160718.img.xz > ......
thanks! i was just looking at emlid and found the forward references a dead end and was thinking... 'will the last image work?' tomp tjtr33 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
