you are in right .... but it is my surprise on that .... any how ... I have a 
cad system on office ... but I use FreeCad too with some difficult but it work 
great (never use for big project) ... my ideal it is to have all pc on linux 
... is a bad things? because the question.


regards

giorgio


________________________________
Da: andy pugh <bodge...@gmail.com>
Inviato: martedì 16 maggio 2017 23.09
A: Enhanced Machine Controller (EMC)
Oggetto: Re: [Emc-users] Best cam linux/open for additive manufactory

On 16 May 2017 at 19:05, Chris Albertson <albertson.ch...@gmail.com> wrote:
> Autodesk Fusion is 3D CAD software for making 3D designs.

It's great, suspiciously so. But it does't run on Linux, which was a
requirement in the original post.

--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Emc-users Info Page - 
SourceForge<https://lists.sourceforge.net/lists/listinfo/emc-users>
lists.sourceforge.net
This list is for users of the Enhanced Machine Controller (EMC). Topics include 
how to obtain, install, configure, and use EMC, as well as other general EMC 
related ...


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to