you are in right .... but my mystake is title/subject of list ... POWERLINK instead profibus (i have the same opinion of your about profibus).
bkt 2017-05-31 12:03 GMT+02:00 Nicklas Karlsson <nicklas.karlsso...@gmail.com>: > For new devices maybe Profibus is not the best choice but it is however > very useful with support for profibus in Linuxcnc since there already are > plenty of these devices manufactured. > > 2017-05-31 11:24 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com>: > > > So I cheked ... is it broke ...SO SORRY AT ALL FOR MY FIRST POST > > SUBJECT. IS WRONG. OPENPOWERLINK INSTEAD OPENPROFIBUS > > > > ...any how thanks a lot for link about "justinbiber.hal" > > ...(note: i prefer Nirvana, Sonic Youth, Pearl Jam, Stone temple > > Pilots ..etc etc ;) ) a good project. Perfect for build 18 point > > calibration on rotary delta > > and good for intercom on "mesa-card-robot-line". For shure I got to test > > it. > > > > > > But the goal is to find the best industrial bus for communication > > between devices and open source ... openpowerlink seems quite open, > > master and slave side > > (ethercat for example in royalty free + open on master side, but not > > royalty free on slave side :( ). > > > > > > > > Openpowerlink seems work quite well on user-space ... so I test it on > > real-time-space (I hope i can realize a quite good latency with > > isolcpu trick + openpowerlink) > > > > bkt > > > > > > > > > > 2017-05-31 11:10 GMT+02:00 theman whosoldtheworld <bleachk...@gmail.com > >: > > > > > @ andy ... I'm new to use gmail ... if change subject on post ... the > > list > > > is breack? > > > > > > bkt > > > > > > 2017-05-31 1:58 GMT+02:00 andy pugh <bodge...@gmail.com>: > > > > > >> On 30 May 2017 at 16:59, theman whosoldtheworld <bleachk...@gmail.com > > > > >> wrote: > > >> > I discover that CC-Link is tipycal "open project" but for people who > > pay > > >> > ... so i search for other industrial bus > > >> > > >> Well.... > > >> > > >> At least one other project (STMBL) is using the Mesa Smart-Serial > > >> protocol. (in addition to the Mesa cards, of course). > > >> It's not any sort of industrial standard, but it does seem to be > fairly > > >> Open. > > >> > > >> -- > > >> atp > > >> "A motorcycle is a bicycle with a pandemonium attachment and is > > >> designed for the especial use of mechanical geniuses, daredevils and > > >> lunatics." > > >> — George Fitch, Atlanta Constitution Newspaper, 1916 > > >> > > >> ------------------------------------------------------------ > > >> ------------------ > > >> Check out the vibrant tech community on one of the world's most > > >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > >> _______________________________________________ > > >> Emc-users mailing list > > >> Emc-users@lists.sourceforge.net > > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > >> > > > > > > > > ------------------------------------------------------------ > > ------------------ > > Check out the vibrant tech community on one of the world's most > > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
