On 6 July 2017 at 16:13, Les Newell <[email protected]> wrote:
> I have 7i80hd-16-sv12im-2x7i48 bitfile loaded and the 7i48 is on P1. I have > my I/Os on P3. https://github.com/LinuxCNC/hostmot2-firmware/blob/master/src/PIN_SV12IM_2X7I48_72.vhd Which I think means that the 7i48s would use IO pins 0 to 23 on P1 and 24 to 47 on P2. But IO 48 to 59 are also set up to be index mask pins for each of the 6 encoders, which is a little unfortunate but probably explains what the "im" is in 7i80hd-16-sv12im-2x7i48. Is there a 7i80hd-16-sv12-2x7i48 bitfile to try instead? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
