It is from May 18th, 2013. They moved to Rev C of the beaglebone black in March 2014. They have not updated the black since then. Functionally, the page looks to still be ballpark.
Personally, I think TI has dropped the black from their roadmap. I would hesitate to move to it at this point. You might want to look at the PINE64 boards. Charles Buckley On Wed, Oct 11, 2017 at 10:59 AM, Jon Elson <el...@pico-systems.com> wrote: > On 10/10/2017 11:47 AM, John Dammeyer wrote: > >> Here's an interesting comparison for use of MachineKit on the BBB. >> https://sites.google.com/site/manisbutareed/beaglebone-black-linuxcnc >> >> This document is not dated, but a few things in it make me think it is > more than several years old. > > Jon > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
