On 12 Oct 2017, at 13:35, andy pugh wrote: > On 11 October 2017 at 22:30, Martin Dobbins <tu...@hotmail.com> wrote: >> now it needs some people to turn Path Pilot into something that will run on >> any machine that runs linuxcnc > > The only thing in the way of that is the things that Tormach have done > specifically to make it difficult (or so it seems) > > There are folk tweaking Pathpilot configs to work on other machines. >
Intriguing... So; can you comment on those things Tormach have done with hardware as they created PathPilot; and the ease with which it might be made to run on more 'ordinary' machines and setups? Marcus > -- > atp > "A motorcycle is a bicycle with a pandemonium attachment and is > designed for the especial use of mechanical geniuses, daredevils and > lunatics." > — George Fitch, Atlanta Constitution Newspaper, 1916 > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
