On 27 November 2017 at 20:40, Gene Heskett <[email protected]> wrote:
> But thats not the /real/ pita. Parport pin 14 is not on the i/o terminals > its apparently spindle motor relay control, and on a 5i25, is the pwm > signal from the 5i25's pwmgen.0. Did you consider looking for a firmware with a pinout to suit the board? > Those white 4 pin plugs fairly scream for a matching cable to be plugged > in as opposed to using the green screw terminals, because to use those > I'll have to open them with a prybar as I have yet to get a wire smaller > than 16 gauge to force its way into that style of terminal, when the > leaf, driven by the screw, is already pre-bent into the closed position Have you tried bootlace ferrules? -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
