hi i reassemble my lcnc mill, and i found that axis move by them self. i think it is something to do with static electricity. i found ground - and when grounded lcnc body of machine - breaker turn off. i measure with dc voltage between machine and ground 2. vdc and when i measure ac voltage between lcnc machine and ground it was 35 v AC.
i know that when use real ground like a water pipe and ground in outlet there always will be current they always be 30 v ac. can it cause problem? thanks aram ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
