Hello An Arduino would work I think, if the driver takes step/dir inputs then motion is simply a pulse loop. Speed control or travel ends can be added easily too.
On Wed, Mar 28, 2018, 18:46 Marius Liebenberg <mar...@mastercut.co.za> wrote: > Hi all > I have to put together a system that will use one servo to drive a small > platform over a distance of 6m at a speed of about 25km/h or 8m/s or > there about. > > I feel that using a full computer and mesa card for just one axis that > does not need a display sounds a bit excessive. The question is what are > the other options if any. > > > > ----------------------------- > Regards / Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 743 6064 > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users