On Thu, May 3, 2018, 21:13 jeremy youngs <[email protected]> wrote:
> Ok, called Peter today, got a bit of help and syntax to get these pins to > show, got that accomplished, git mesaflash installed, verified invocation > in terminal. > I get this message no matter what I tell pnc it is. 5i25,7i43 etc . All > give me the same you haven forgot to assign pwm/ step to x,y,z, axis. > Peter had suggested trying a Sim . I did an axis Sim and it appears that > Hal is empty, so I'm not understanding how to lie to this thing well enough > to get around this. I was advised by pcw not to update to 2.7.12 as it > suffers bugginess in the 7i90 7i43 as well. I'm not desperate for this to > work, but parts keep showing up for this machine and I would like this to > be able to read my encoders so I can find out what they are. Thanks gents > > https://drive.google.com/file/d/1ZKFgGfvRCEKiSiwzWoXOk9er7-l-GQdo/view?usp=drivesdk > https://drive.google.com/file/d/15kKmBb3mn9nJMu4ZBhFOedJJVuMOrxu9/view?usp=drivesdk The second pic is of a score I made on Facebook. A bit 30 devlieg qc spindle for $50 plus 17 shipping. That was a mood brightener. This may post twice as I forgot to make links, but they are all public. Thanks again fellas > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
