Hi John; Absolutely - have one on one of my mills. I added it what must be a couple of years ago; I believe that the "XHC-04" is what it is called.
I've got spindle control, jogging, zero setting, and probably other things - not all the icons are in use, but more than enough to use it 90% of the time after machine is homed; only the "start" button is now only used on the monitor. On Mon, May 7, 2018 at 12:25 PM, John Dammeyer <[email protected]> wrote: > Don't know if this link will make it through but a search of EBAY for > "Wired USB MPG Pendant Handwheel Hand Wheel LCD Display for CNC Milling > Router" brings up this wired pendant. Does this work with LinuxCNC and/or > MachineKit? > > Thanks > John > > > https://www.ebay.ca/itm/CNC-USB-Hand-Wheel-Pulse- > Generator-MPG-Pendant-for-M > ach3-3-Axis-Router/271618047181?_trkparms=aid% > 3D222007%26algo%3DSIM.MBE%26ao > %3D2%26asc%3D20180124145912%26meid%3D7e85757f7c5b4a4193ccd1373886 > 3a81%26pid% > 3D100005%26rk%3D5%26rkt%3D6%26sd%3D401277102389%26itm% > 3D271618047181&_trksid > =p2047675.c100005.m1851 > > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
