Ralph, my sis in law has one of those on her old walking foot leather stitcher. The motor seems well made and has a surprising amount of torque, but the controller is a little disappointing. Its a bit laggy, even for a sowing machine, but that might due to the way my brother hooked it up (I think he just power cycles the controller to turn the motor on and off : ) ). Certainly worth looking into. Even if the controller is no good for pos control, the motors are inexpensive.
Cheers, Kurt On Sun, Jul 8, 2018 at 11:36 PM, Ralph Stirling < [email protected]> wrote: > Anybody ever checked out this type of motor for > CNC use? Seems like a pretty good deal for 400W > with a drive, at least for a small spindle motor. I'm > wondering how easily the drive could be hacked for > LCNC position control. There are a lot of different > motors and power ratings on ebay in this category. > > https://ebay.com/itm/253624140119 > > -- Ralph > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
